Filter
Top Products
17
Panel Descriptions
RG-3’s Bottom Right Panel
fig.00-030
1 Ext Memory port
You can connect USB memory (sold separately) here (p.
22).
2 Ext Memory port cover
You can ensure the cover remains closed when you
have USB memory connected (p. 22).
* Be sure to close the cover of the Ext Memory port after
connecting USB memory to the Ext Memory port. If the
cover is left open, someone could get hurt if their legs bump
into it; the cover could be damaged as well.
3 Ext Memory port cover lock
You can lock the Ext Memory port cover to prevent
theft of the USB memory connected to the Ext Memory
port (p. 22).
4 FDD connector
You can connect a commercially available CD drive or
optional floppy disk drive here.
NOTE
CD drives that draw their power from the USB
connector cannot be used.
* Use floppy disk drive available from Roland.
■ Installing the Floppy Disk Drive
Attach the floppy disk drive as shown the figure, using
the mounting holes on the RG-3‘s bottom panel.
* For details of the attachment, refer to the owner’s manual of
the floppy disk drive.
fig.00-040
* There are two groups of mounting holes. You can use either
group.
1
2
3
4