Roland RG-3 Electronic Keyboard User Manual


 
82
Chapter 5. User Program Registration
Saving the User Program Sets
The 36 separate configurations of User Programs registered in the RG-3 can
be saved as sets in User Memory (p. 25) or to USB memory.
* When saving the settings to USB memory, connect the USB memory to the Ext
Memory port (p. 22).
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the USER PROGRAM screen.
fig.05-020d
3.
Press the [Song] (Select -) button or [ ] (Select +) button so
“SAVE” is flashing.
fig.05-110d
4.
Press the [Enter] button.
The following screen appears.
fig.05-120d
5.
Press the [Song] (Select -) button or [ ] (Select +) button so that
the “User Program save destination” is flashing.
fig.05-130d
6.
Press the [ ] (Value -) button or [ ] (Value +) button to
select the “User Program save destination.”
Display Description
User Memory The User Program is saved in User Memory.
Ext Memory The User Program is saved in USB memory.
You can restore the content
in the User Memory to the
original default factory
settings.
Refer to “Initializing the
User Memory, USB Memory,
and Floppy Disks” (p. 93).
NOTE
Use USB memory available
from Roland.
Proper operation cannot be
guaranteed if other external
memory products are used.