Filter
Top Products
83
Chapter 5. User Program Registration
7.
Press the [Song] (Select -) button or [ ] (Select +) button so that
the “User Program save-destination number” is flashing.
fig.05-140d
8.
Press the [ ] (Value -) button or [ ] (Value +) button to
select the “User Program save-destination number.”
Value: UPG Set 01–UPG Set 99
To return to the original screen without saving the User Program, press the
[Function] (Exit) button.
9.
Press the [Enter] button.
The User Program is saved to the User memory or USB memory.
10.
Press the [Function] (Exit) button so the indicator goes out.
NOTE
Be sure not to turn off the
power as long as
“Executing...” is displayed.
Turning off the power at this
time may corrupt the USB
memory and/or User
Memory and render them
unusable.
When there is no User Program assigned to a number, this is indicated in the display
in the following form: “2: (Empty).”
fig.05-150d
The following appears in the screen if you attempt to save a User Program to a
number to which a User Program has already been saved.
fig.05-160d
If you save performance settings to a number that already has User Programs saved
to it, the previously saved User Programs are then deleted.
To delete the saved set of User Programs and save the new performance settings to
that number, press the [Enter] button.
If you do not want to delete the saved User Programs, press the [Function] (Exit)
button to cancel the save.
When deleting the set of
saved User Programs, refer
to “Deleting Saved User
Program Sets” (p. 86).