Filter
Top Products
53
Saving User Programs
Saving User Programs
You can save the settings of the currently selected tone buttons settings as a single set for instant recall when desired. These are called “user program,”
and you can store 40 such settings in internal memory.
2 4 3 75 6
1. Make the desired tone settings (p. 25).
2. Press the [Application/Lesson] button ➝ [Function] ➝ [O] button ➝ [User Programs] ➝ [O] button.
The “User Program” screen will appear.
3. Press the [O] button.
The “Write the User Program” screen will appear.
4. Enter a name for your “user program.” Use the cursor left/right buttons to select the character that you want to change, and use
the cursor up/down buttons to change the character.
MEMO
If you don’t want to change the name of your user program, proceed to step 5.
5. Press the right cursor button a number of times to select “Write Destination.”
6. Use the cursor up/down buttons to select the storage-destination number.
7. Press the [O] button.
The current settings will be stored as “user program.”
NOTE
Never turn o the power while the screen indicates “Executing...”
MEMO
To return the “user program” to the factory-set condition, refer to “Restoring the Factory Settings” (p. 60).