Filter
Top Products
64
Connecting Other Devices
Connecting to Audio Equipment
You can play the HPi-6F’s sounds through amplied speakers or a
stereo system that has line input jacks. You can also connect your
portable audio player or other audio playback device, and play its
sounds through the HPi-6F.
To make connections, use audio cables.
Caution when connecting audio equipment
921
• To prevent malfunction and damage to your speakers, always be sure
to turn the volume all the way down on all your equipment, then
switch the power o on everything before you make any connections.
926a
• Using a connection cable that contains a built-in resistor may cause
insucient volume from the device connected to the Input jacks. If so,
use a connection cable that does not contain a resistor.
Listening to an Audio Device Through the
HPi-6F
Digital audio
player, etc.
1. Minimize the volume of the HPi-6F and of the audio device.
2. Turn o the power of the HPi-6F and of the audio device.
3. Use commercially available audio cables to connect the
audio device to the HPi-6F.
4. Turn on the power of the audio device.
5. Turn on the power of the HPi-6F.
6. Start playback on the audio device, and adjust the volume of
the HPi-6F and of the audio device.
Turning O the Power
1. Turn the volume all the way down on the HPi-6F and on the
audio device you’re about to connect.
2. Turn o the HPi-6F.
3. Turn o the connected audio device.
Connecting Speakers to the HPi-6F to Output
Sound
Phone plug
Amplied speakers,
stereo set, etc.
1. Minimize the volume of the HPi-6F and of the speakers.
2. Turn o the power of the HPi-6F and of the speakers.
3. Use commercially available audio cables to connect the
HPi-6F to the speakers.
4. Turn on the power of the HPi-6F.
5. Turn on the power of the speakers.
6. Adjust the volume of the HPi-6F and of the speakers.
When you play the HPi-6F’s keyboard, you’ll hear the sound from the
connected speakers as well as from the built-in speakers.
Turning O the Power
1. Turn the volume all the way down on the HPi-6F and on the
speakers you’re about to connect.
2. Turn o the connected speakers.
3. Turn o the HPi-6F.