Filter
Top Products
124
Chapter 6 User Program Registration
Chapter 6
Determining the save destination
6.
Touch <Disk> or <User>.
Touch <Disk> if you are saving to a floppy disk; touch
<User> if you are saving to user memory.
7.
Touch
to select the save-destination User
Program number.
If a User Program set name is displayed, a User Program
set saved to that saved to that number is already.
If you select a number with previously saved User
Program set data, then save a new set of data to that
same number, the older User Program set will be
deleted. If you don’t want to lose any previously saved
User Programs, select a number in the save-destination
column that does not yet have a name.
Save
8.
Touch <Save> to begin the save.
Touch <Exit> to return to the User Program File screen.
* Never turn off the power or eject the floppy disk from
the disk drive while the operation is in progress.
Doing so will damage the KR’s internal memory,
making it unusable.
→
When clearing the set of saved User Programs, refer to
“Deleting Saved User Program Sets” (p. 125).
■
Loading Saved User Program
Sets
User Programs that have been saved on floppy disks or in
user memory can be called up, on an individual set basis, to
the [User Program] button.
* Note that calling up these User Programs results in the
deletion of all User Programs currently recorded to the [User
Program] button.
When loading a set of User Programs from a floppy disk,
first insert the floppy disk in the disk drive.
→
For more on working with the disk drive, refer to “Using
Floppy Disks” (p. 114).
1.
Press the [User Program] button.
2.
Touch <File>.
3.
Touch <Load>.
A “Load User Program screen” like the following
appears.
fig.d-upgload.eps_50
Specifying the set of User Programs to be
loaded
4.
Touch < > (Disk) or < > (User).
Touch < > if you are loading User Programs from a
floppy disk; touch < > if you are loading User
Programs from the user memory.
5.
Touch the name of User Program to load.
6.
Touch <Load>.
The confirmation message appears.
7.
Touch <OK>.
The selected User Programs are loaded to the [User
Program] button.
* Never turn off the power or eject the floppy disk from
the disk drive while the operation is in progress.
Doing so will damage the KR’s internal memory,
making it unusable.
KR-17_15_e.book 124ページ ２００４年１２月６日 月曜日 午後１時５４分