Roland KR-15 Electronic Keyboard User Manual


 
131
Chapter 7 Creating and Editing Songs
Chapter 7
Changing the Recording Method
1.
Press the [Menu] button.
The Menu screen appears.
fig.d-menu1.eps_50
2.
Touch <Rec Mode>.
A “Rec Mode screen” like the following appears.
fig.d-recmode.eps_50
3.
Touch <Rec Mode> to select the recording
mode.
4.
Touch <Exit>.
Returns to the Menu screen.
Recording While Erasing the
Previous Recording (Replace
Recording)
The recording process where previous material is erased as
new material is recorded is called “replace recording.” This
setting is in effect when you turn on the power.
1.
In the “Rec Mode screen” (p. 131), select <Replace>.
Touch <Exit> to return to the Menu screen.
The KR is set to the replace recording mode.
Record the performance using the procedures described
in Chapter 4 (p. 105), “Multitrack Recording with 16
Parts (16-Track Sequencer)” (p. 127).
Layering a Recording Over
Previously Recorded Sounds
(Mix Recording)
You can record a performance layered over a previously
recorded performance. This method is called “Mix
Recording.”
1.
In the “Rec Mode screen” (p. 131), select <Mix>.
Touch <Exit> to return to the Menu screen.
Record the performance using the procedures described
in “Recording While Selecting the Track Buttons
(Redoing Recordings)” (p. 111), “Multitrack Recording
with 16 Parts (16-Track Sequencer)” (p. 127), or other
methods.
* After you have finished with mix recording, return to the
usual replace recording mode.
Display
Recording Method
Replace
Replace Recording
Mix
Mix Recording
Loop
Loop Recording
Auto Punch-
In/Out
Punch-in recording of the interval
between set markers.
Manual
Punch-In/Out
Punch-in recording starting from the
point at which the pedal, the
Performance Pad or the [ (Rec)]
button is pressed.
For more about Punch In Recording,
refer to p. 133.
Tempo
You can add tempo changes to a
recorded composition. See p. 142.
KR-17_15_e.book 131ページ 2004年12月6日 月曜日 午後1時54分