Filter
Top Products
162
Chapter 9 Various Settings
Chapter 9
3.
Touch the name of the parameter you want to set.
Refer to the corresponding page for each function.
4.
Touch <Exit> to return to the Functions screen.
■
Changing Standard Pitch
(Master Tune)
“Standard pitch” generally refers to the pitch that is heard
when you play middle A. When performing in an ensemble
with other instruments, adjust the standard pitch so that the
instruments of the ensemble match. Tuning all the
instruments to a standard pitch is called “master tuning.”
At Step 3 in “Procedure” (p. 161), touch <Master Tune>.
A screen like the one shown below appears.
fig.d-tuning.eps_50
Touch to change the pitch.
Standard pitch can be set to any value from 415.3–466.2 Hz.
The setting is at “440.0 Hz” when the KR is powered up.
■
Changing the Language (Language)
Five choices are available for the language used in displaying
information on the screen.
At Step 3 in “Procedure” (p. 161), touch <Language>.
A screen like the one shown below appears.
fig.d-lang.eps_50
Touch to select the language.
Available settings
English, Japanese, German, French, Spanish
* German, Spanish, and French are displayed for some
functions. Other screens will be displayed in English.
■
Changing the Screen Message
When the Power Is Turned On
(Opening Message)
You can modify this screen to show your favorite phrase
when the power is turned on.
At Step 3 in “Procedure” (p. 161), touch <Opening Message>.
A screen like the one shown below appears.
fig.d-openmsg.eps_50
Use to move the cursor.
When you touch the character icon, the character is input
where at the position.
When you touch the icon for the character to be input, the
character appears at the cursor position. For example,
touching the <ABC> icon in succession cycles you through the
available choices in that character group (A
→
B
→
C
→
A...).
Each touch of <A-a-0-!> cycles the type of characters through
“English (upper case),” “English (lower case),” “numerals,”
“symbols,” then back to “English (upper case).”
When you touch <Del>, the character at the cursor position is
deleted.
When you touch <Ins>, a space is inserted at the cursor
position.
When you have finished inputting the characters, touch
<Execute>.
* Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s
internal memory, making it unusable.
→
If you touch <All Clear> at the bottom of the screen and then
touch <Execute>, the display reverts to the screen that
normally appears when you turn on the power to the
instrument.
KR-17_15_e.book 162ページ ２００４年１２月６日 月曜日 午後１時５４分