Filter
Top Products
37
User Program Registration
7
Press the [
▼
] button to select the lower line of the screen, and then use the
[+] [–] buttons to select the save-destination number for the set of user
programs.
fig.d-UP-save2.eps
* To return to the previous screen without saving the user program set, press the
[EXIT] button.
8
Press the [Enter] button.
The set of user programs will be saved.
9
Press the [Piano Designer] button a number of times until its indicator has
gone out.
Setting
UPG Set 01 – UPG Set 99
Never turn off the power
while the screen indicates
“Executing...” Doing so will
damage the USB memory or
user memory, rendering it
unusable.
Numbers in which data has not been saved are shown in the screen as
“2: (Empty).”
fig.d-UP-save3.eps
If you select a number in which performance settings data has already been
saved, and then attempt to save, the following screen will appear.
fig.d-UP-save4.eps
If you save data to a number that already contains data, the previously saved
data will be erased.
If you want to erase the previously saved data and replace it with the new data
you’re saving, press the [Enter] button.
If you don’t want to erase the previously saved data, press the [Exit] button to
cancel the Save operation.
If you want to delete a saved
set of user programs, refer to
“Deleting a Set of User
Programs” (p. 40).
RG-1F3F_e.book 37 ページ ２０１０年１月１９日 火曜日 午前９時１分