Filter
Top Products
55
Making Various Settings
The “Panel Lock” setting will disable all buttons. This lets you
prevent the settings from being changed when a button is
pressed accidentally.
Setting
1.
Make the desired tone settings and other settings.
2.
Hold down the [Piano Designer] button and press the
[Song] button.
Panel Lock will be activated, and the following screen will
appear.
fig.d-PanelLock.eps
* If you perform this operation while a song is playing or being
recorded, playback or recording will stop.
While Panel Lock is active, you’ll be able to play the
keyboard, use the [Volume] knob to adjust the volume, and
use the [Brilliance] knob to adjust the brightness.
Cancelling
1.
To cancel Panel Lock, once again, hold down the
[Piano Designer] button and press the [Song] button.
The “Playback Lock” setting prevents the song from playing if the
[Play/Stop] button is pressed.
This lets you prevent an unwanted song from playing when the
button is pressed accidentally while you’re playing the keyboard.
Setting
1.
Hold down the [Piano Designer] button and press the
[Play/Stop] button.
Playback Lock will be activated.
If you press [Play/Stop] button in this state, the following
screen will appear.
fig.d-PlayLock.eps
* If you perform this operation while a song is playing or being
recorded, playback or recording will stop.
Cancelling
1.
To cancel Playback Lock, once again, hold down the
[Piano Designer] button and press the [Play/Stop]
button.
Preventing the Current Settings from
Changing (Panel Lock)
Preventing a Song from Playing
(Playback Lock)
RG-1F3F_e.book 55 ページ ２０１０年１月１９日 火曜日 午前９時１分