Roland RG-3F Electronic Keyboard User Manual


 
80
Troubleshooting
High-pitched ringing is heard
If you hear this in headphones:
Piano sounds that have a brilliant and crisp character contain substantial high-frequency
components that may sound as though a metallic ringing has been added. This is because the
character of an actual piano is being faithfully reproduced, and is not a malfunction. This ringing is
more obtrusive if the reverb effect is applied heavily, so you may be able to minimize it by
decreasing the reverb.
If you don’t hear this in headphones:
It is likely that there is some other reason (such as resonances within the unit). Please contact your
dealer or a nearby Roland service center.
Low notes sound wrong, or are
buzzy
If you don’t hear this in headphones:
Performing at high volumes may cause the speakers or objects near the RG-1F/RG-3F to resonate.
Fluorescent lights or glass doors may also resonate sympathetically. In particular, this is more likely
to occur for lower notes and higher volumes. You can take the following measures to minimize
resonances.
Locate the speakers 10–15 cm away from walls or other surfaces.
Keep the volume down.
Move away from the objects that are resonating.
If you hear this in headphones:
It is likely that there is some other reason. Please contact your dealer or a nearby Roland service
center.
Song doesn’t play back correctly
Song won’t play
Does the screen indicate message, like “Delete User Song OK?” (p. 51).
The internal songs cannot be played back while recorded performance data remains in the RG-1F/
RG-3F’s memory.
Erase the performance data or save it to the “Favorites” or to your USB memory before you play back
the song.
Is the “Playback Lock” setting (p. 55) activated?
When the Playback Lock setting has been activated, the [Play/Stop] button no longer functions as
the button for starting and stopping song playback, and cannot be used to play back the song.
Cancel Playback Lock.
Pressing the [ ] button
doesn’t return to the beginning of
the song
Some music files may contain settings that stop play at a point partway through the song. Press the
[ ] button several times more to return to the beginning of the song.
The [ ] and [ ] buttons
don’t work
If you attempt to play back performance data that contains more data than the entire capacity of the
RG-1F/RG-3F’s memory, you may find that operations other than playback (such as rewind or fast
forward) become unavailable.
No sound is heard when a song is
played back
Has Local Control been set to “Off”?
When Local Control is set to Off, no sound is produced by playing back a song. Set Local Control to
On (p. 65).
Could the playback volume for the song (p. 46) or for the audio file or music CD (p. 48) be set too low?
Can’t record/Can’t play back
The recorded performance has
disappeared
Any performance that has been recorded is deleted when the power to the RG-1F/RG-3F is turned
off or a song is selected.
A performance cannot be restored once it’s been deleted. Be sure to save it on a USB memory or User
Memory before you turn off the power (p. 52).
Can’t play back a song from CD
Reading of data from the CD starts when the CD is inserted in the drive.
It may take a few moments to complete reading of the data.
Case
Cause/Remedy
RG-1F3F_e.book 80 ページ 2010年1月19日 火曜日 午前9時1分