Filter
Top Products
38
User Program Registration
Here’s how to load an entire set of user programs that you saved to user
memory (p. 44) or USB memory (sold separately).
* If you want to load a set of user programs that was saved to USB memory,
connect your USB memory to the external memory connector (p. 15).
1
Press the [Piano Designer] button so its indicator is lit.
2
Use the [
▲
] [
▼
] buttons to select “6. User Program.”
fig.d-PD6-UserProgram.eps
3
Press the [Enter] button.
4
Use the [
▲
] [
▼
] buttons to select “LOAD.”
fig.d-UP-load.eps
5
Press the [Enter] button.
6
Use the [+] [–] buttons to change the “LOAD from” setting (the location of
the set of user programs that you want to load).
fig.d-UP-load1.eps
Loading a Set of User Programs
Setting
Description
User Memory
Load a set of user programs stored in user memory.
Ext Memory
Load a set of user programs stored on USB memory.
Be aware that when you load
a set of user programs, all of
the user programs stored in
this instrument will be lost.
RG-1F3F_e.book 38 ページ ２０１０年１月１９日 火曜日 午前９時１分