Filter
Top Products
70
Making Various Settings
You can assign functions to the left pedal and center pedal so
that the assigned function will be activated when you press the
corresponding pedal.
You can save this setting in the RG-1F/RG-3F’s memory
using the Memory Backup function (p. 72).
1.
Press the [Piano Designer] button so the indicator is lit.
2.
Use the [
▲
] [
▼
] buttons to select “9. Function.”
3.
Press the [Enter] button.
4.
Use the [
▲
] [
▼
] buttons to select the pedal whose
settings you want to make.
fig.d-Func-PedalC.eps
5.
Use the [+] [–] buttons to select the function that will be
assigned to the pedal.
6.
Press the [Piano Designer] button several times to make
the indicator go dark.
Assigning a Function to the Pedals
Parameter
Description
Pedal Cent
Assign a function to the center pedal.
Pedal Left
Assign a function to the left pedal.
Value
Description
Sostenuto
The pedal will operate as a sostenuto
pedal (p. 20).
Soft
The pedal will operate as a soft pedal (p.
20).
Play/Stop
The pedal will start or stop playback.
Pedal EX
When using Dual performance (p. 23),
playing without holding down the pedal
will sound only the tone of the tone
button at the left. When you play while
holding down the pedal, the other tone
will be layered onto that tone. The volume
of the added sound will depend on how
deeply you press the pedal.
* A pedal assigned to the “Pedal EX”
function will not do anything if you’re
not using Dual performance.
Octave
When you play the keyboard while
holding down the pedal, notes one octave
above the keys you play will be added to
the notes you play.
The volume of the added upper octave
will depend on how deeply you press the
pedal.
RG-1F3F_e.book 70 ページ ２０１０年１月１９日 火曜日 午前９時１分