Filter
Top Products
23
Listening to Demo Songs
2.
Press one of the six Tone buttons or the [Twin Piano] button.
The songs will play consecutively, starting with the demo song you selected. The button for the
song currently being played back flashes on and off.
When playback of the last song is reached, playback continues by returning to the first song and
playing that again.
3.
To stop playback, press the flashing button.
4.
Press the [Right] button or the [Key Touch] button to exit Demo mode.
The indicators return to their previous state.
A demo song will not play if you press an unlit button.
In order to simulate the rich sounds typical of an acoustic piano, this instrument produces
reverberation and a variety of other sounds together with the piano sound. This demo
lets you compare how the piano sounds with and without these additional sounds.
1.
Hold down the [Right] button and press the [Key Touch] button.
2.
Press the [Split] button.
The indication in the display will change.
The [Brilliance], [Piano], and [E. Piano] buttons will blink, and the [3D] and [Reverb]
buttons will light.
While the [Brilliance] button is blinking, you can listen to demos of the hammer noise and
key-off resonance. Press the [3D] button if you want to hear the damper resonance demo,
or press the [Reverb] button if you want to hear the string resonance demo.
When you press the [3D] button, the [Organ] button will also blink in addition to the
[Piano] and [E.Piano] buttons.
Listening to the Piano Sound Demo Songs
When the following appears in the display
If you have recorded a song but have not yet saved it, “dEL” will appear, blinking, when
you select a song.
fig.d-dEL.eps
You cannot play back a demo song if memory contains an unsaved song.
If you want to delete your performance and play back the demo song, press the [ ]
button. If you don’t want to delete your performance, press the [ ] button. If you want
to save your recorded performance, refer to p. 60.
HP203_e.book 23 ページ ２００７年４月１２日 木曜日 午前１０時５分