Filter
Top Products
59
Saving Your Performance
4.
Use the [-][+] buttons to select whether you will initialize “Int” (Internal
Memory) or “EXt” (USB memory or floppy disk).
Internal Memory USB memory, floppy disk
5.
Press the [] button.
The display will indicate “Sur,” and the [ ] button and [ ] button will blink.
If you decide not to initialize, press the [ ] button.
6.
Press the [] button.
Initialization will begin.
The entire contents of the selected memory will be erased.
Never turn off the power while “FMt” is blinking in the display.
Initializing the HP203’s internal memory will not initialize settings other than the
contents of internal memory. If you want to return settings other than the contents of
internal memory to their factory-set condition, execute the Factory Reset operation (p.
79).
Don’t disconnect the USB memory until USB memory initialization has been completed.
While a floppy disk is being initialized, do not eject the disk from the floppy disk drive
or disconnect the cable of the disk drive.
NOTE
NOTE
NOTE
NOTE
HP203_e.book 59 ページ ２００７年４月１２日 木曜日 午前１０時５分