Filter
Top Products
76
Various Settings
Normally, you don’t need to install a driver in order to connect
the HP203 to your computer. However, if some problem
occurs, or if the performance is poor, using the Roland
original driver may solve the problem.
Specify the USB driver you want to use, and then install the
driver.
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Hold down the Track [Accomp] button and use
the [-] [+] buttons to make the display indicate
“USb.”
When you take your finger off the button, the display
will indicate the value of the setting.
3.
Use the [-] [+] buttons to change the setting.
4.
Turn on the power once again.
For details on downloading and installing the
Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
For details on connecting your computer via the USB
connector, refer to “Connecting a Computer” (p.
83)
This setting is remembered even when the power is
turned off.
In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the external
memory setting.
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2.
Hold down the Track [Accomp] button and use
the [-] [+] buttons to make the display indicate
“UMd.”
When you take your finger off the button, the display
will indicate the value of the setting.
3.
Use the [-] [+] buttons to change the setting.
4.
Turn on the power once again.
This setting is remembered even when the power is
turned off.
Changing the USB Driver Settings
(USB Driver)
Setting
Explanation
Generic
Choose this if you want to use the standard
USB driver that was included with your
computer.
Normally, you should use this mode.
Original
Choose this if you want to use a USB driver
downloaded from the Roland website.
Changing the External Memory Setting
(External Memory Mode)
Setting
Explanation
Mode 1
Mode 2
HP203_e.book 76 ページ ２００７年４月１２日 木曜日 午前１０時５分