Filter
Top Products
58
Saving Your Performance
Here’s how you can completely erase all songs that were saved in internal memory, USB
memory (sold separately), or a floppy disk (sold separately).
Once an initialization is performed, all songs that have been saved in memory will be
erased. The erased data cannot be recovered, so we recommend that you check the
contents of memory before you proceed.
In order to use new USB memory or a new floppy disk with the HP203 for the first time,
you’ll need to initialize (format) it. USB memory or a floppy disk that has not been
initialized can’t be used with the HP203.
For details on handling USB memory, refer to “Using External Memory” (p. 21).
fig.Panel-SaveSong-j.eps
1.
If you will be initializing USB memory, connect the USB memory to the
external memory connector (p. 21).
If you will be initializing a floppy disk, connect your floppy disk drive to
the external memory connector, and insert the disk into the drive.
2.
Hold down the [Brilliance] button and press the [3D] button.
The display will indicate “Fnc,” and you’ll be in Function mode.
fig.d-Fnc.eps
3.
Hold down the [Int Song/Ext Song] button and use the [-] [+] buttons to
make the display indicate “FMt.”
When you take your finger off the button, a screen in which you can select the memory that you
want to initialize will appear.
Initializing the Memory
NOTE
NOTE
HP203_e.book 58 ページ ２００７年４月１２日 木曜日 午前１０時５分