Filter
Top Products
45
Creating a Patch
You can assign a variety of parameters (such as TVF Resonance or TVA Level) to the knobs at the right of
the front panel for direct, intuitive editing of the parameters.
The partials to which the tone parameters assigned to the different knobs are applied are specified in the
PATCH TOP
screen or with
STRUCTURE [1]
at the right of the front panel. You can use the knobs to edit
the tone parameters of the partial whose indicator is lit.
fig.08-07(LCD_PartialSelect & PANEL_Strycture1Button)
* The Partial select setting will be written into the VC-1 by taking the saving procedure. (p. 27)
While editing a Partial parameter, any Partial sound can be muted (Partial Mute).
Partials to be muted are specified in the
PATCH TOP
screen or with
STRUCTURE [3]
at the right of the
front panel. The partial is muted when the indicator is off; muting is defeated when the indicator is lit.
fig.08-08(LCD_PartialMute & PANEL_Structure3Button)
* The Partial Mute setting will be written into the VC-1 by taking the saving procedure. (p. 27)
Editing with the Panel Controls (Partial Select)
Silencing the Sound of the Partial
Off Off On Off
OnOffOffOff
vc1_for_XT_e1 45 ページ ２００５年３月８日 火曜日 午後１２時５５分