Filter
Top Products
49
Creating a Patch
Initialize
means to return the settings of the currently selected patch to a standard set of values. The
Initialize operation will affect only the currently selected patch in temporary area; the patches that are
stored in internal memory and work area will not be affected. If you wish to restore all of the VC-1’s
settings to their factory values, perform a
Factory Reset
(p. 28).
fig.08-09(Patch_Initialize)
1.
Access the
PATCH TOP
screen, and select the patch that you wish
to initialize (p. 12).
2.
Touch
<>
in the upper right of the screen. A pulldown menu
appears.
3.
In the pulldown menu, touch
<INITIALIZE>
. The
INITIALIZE
window appears.
fig.08-10(LCD_Initialiae)
4.
Touch some buttons (checkbox) in the screen to select the object
you want to initialize (
✔
).
<Check All>:
Mark all object.
<PATCH FACTOR>:
Patch factor settings. (p. 19)
<CTRL SETUP>:
Control setup settings. (p. 19)
<COMMON>:
Common parameter settings. (p. 50)
<PART-1>:
Partial-1 parameter settings. (p. 56)
<PART-2>:
Partial-2 parameter settings. (p. 56)
5.
Touch
<Execute>
. The initialization will be carried out, and you’ll
be returned to the
PATCH TOP
screen.
Initializing Patch Settings
vc1_for_XT_e1 49 ページ ２００５年３月８日 火曜日 午後１２時５５分