Filter
Top Products
45
Creating sounds
Creating sounds
fig.FXTIME-knob
If the DELAY indicator is lit
The knob adjusts the spacing between delay sounds (the delay time). Turning the knob toward
the right lengthens the spacing.
If the REVERB indicator is lit
The knob adjusts the length of reverberation (the reverb time). Turning the knob toward the
right produces the impression of a more spacious room.
* The TIME setting is shared by the UPPER tone and LOWER tone (p. 46).
fig.FXDEPTH-knob
If the DELAY indicator is lit
The knob adjusts the amount of delayed sound (the delay level). Turning the knob toward the
right increases the level.
If the REVERB indicator is lit
The knob adjusts the amount of reverb sound (the reverb level). Turning the knob toward the
right increases the level.
TIME knob
DEPTH knob
volume
time
Direct sound
Reverberation
Reverb time
volume
Delay time
time
Direct sound
Delay sounds
Eight combinations of parameter settings (templates) are provided for both DELAY
and for REVERB. The templates also include settings for parameters that cannot be
edited using the panel knobs (p. 63).
Selecting an effect template
1. Use the EDIT button to make the indicator light for the effect (DELAY or
REVERB) for which you want to select a template.
2. Hold down the FX ON button, and press one of the NUMBER buttons (1–8).
The settings of the template whose NUMBER button you pressed are applied to
the effect you selected in step 1.
DELAY Name REVERB Name
1 Simple Delay 1 Room 1
2 1 Shot Delay 2 Room 2
3 Medium Delay 3 Studio 1
4 Long Delay 4 Studio 2
5 Analog Delay 5 Hall 1
6 Mod Delay 6 Hall 2
7 Chorus 1 7 Plate 1
8 Chorus 2 8 Plate 2
SH-201_r_e.book 45 ページ ２００６年４月２７日 木曜日 午前１１時２８分