Filter
Top Products
163
To select the MIDI page:
Press the PITCH/MIDI button in the DISPLAY SELECT section, and select the MIDI page by
pressing the appropriate Menu button.
MIDI CONTROL Page
1 MODE
Determines the MIDI operating mode of the AR-80. This should be set to match the
connected MIDI device to ensure proper MIDI control and response.
• Electone
Select this setting when using the AR-80 with another Electone. (This is the default setting.)
• DOC
Select this setting when using the AR-80 with instruments compatible with Disk Orchestra
Collection (D.O.C.) software. The Mode automatically changes to DOC when a “DOC On”
MIDI message is received, or when a D.O.C. disk has been inserted in the M.D.R. disk slot.
• XG/GM
Select this setting when using the AR-80 with XG- and GM-compatible devices. The Mode
automatically changes to XG/GM when a “XG On” or “GM On” MIDI message is received,
or when a XG or GM disk has been inserted in the M.D.R. disk slot.
2 OUTPUT (UPPER, LOWER, PEDAL)
Determines the channels over which MIDI data is sent, for each keyboard. To restore the
default setting for each of these parameters, press both of the corresponding Data Control
buttons (“up” and “down” buttons) simultaneously.
HELP
DISK
ACCOMP.
PROGRAM
HOLD
PITCH/
MIDI
SEQUENCE
PROGRAM
VOICE
EDIT
REGIST.
SHIFT
EFFECT
SET
PAGE
M.O.C./
L.M.SPLIT
FOOT
SW.
VOICE
DISPLAY
321
The A.B.C. accompaniment
features of the AR-80 cannot be
used when the Mode is set to
DOC or XG/GM.