Filter
Top Products
93
To change the status for each part, press the appropriate Data Control button
in the upper row, corresponding to the part or parts you wish to record:
• ALL RECORD
This is available only in record standby. Selecting this instantly sets all parts (except K.B.P.) to
record standby.
• LOWER
Lower keyboard data.
• UPPER
Upper keyboard data.
• PEDAL
Pedalboard data.
• K.B.P.
Keyboard Percussion data. (Keyboard Percussion can be
recorded and played independent of the Style patterns.)
• CONTROL
Control data. (See “Overview of M.D.R. Operation” above.)
Each press of the appropriate Data Control button alternately selects the
available settings: RECORD, PLAY, and OFF.
• RECORD
Sets the corresponding part to record standby.
• PLAY
Sets the corresponding part to playback (for monitoring while recording other parts).
• OFF
Turns off the corresponding part. This is useful for temporarily muting a part that has been
recorded.
3. Press the PLAY button, and start playing after numbers appear in the
display.
For example, if you’ve set LOWER, PEDAL and CONTROL to RECORD (and all other parts to
PLAY or OFF), play the Lower keyboard and Pedalboard.
4. After you’ve finished recording the first part(s), stop recording by pressing
the STOP button.
5. Press RECORD to set up recording of the next part.
In this example, the new recording contains the performance data of the Lower and Pedal in
addition to Registration and setup data. The small dashes (“--”) appear at the left part of LED
display and flash along with the song number, warning you that the selected song number
already contains recorded data.
6. Select the parts for recording and playback.
As you did in step #2 above, set to RECORD those parts you wish to record and set to PLAY
those parts you wish to monitor while recording. Set to OFF the parts you temporarily wish to
mute.
Setting the K.B.P. part to
“RECORD” automatically sets
LOWER and PEDAL to “OFF,”
and vice versa.