Yamaha CLP-F01 Musical Instrument User Manual


 
CLP-F01 Detailed Settings – [FUNCTION]
ENGLISH
40
Basic Procedure in Function Mode
Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1 Engage Function mode.
Press the [TEMPO/FUNCTION#] button so that its [FUNCTION#] indicator
lights.
will appear on the display. (The indication of “ ” varies depending on
the status of the unit and usage.)
2 Select a function.
Use the [TEMPO/FUNCTION# ] buttons to select the desired function from
F1–F9.
3 Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the [+/YES] button once to enter the
respective sub-mode.
4 Operate the desired function using the following
two buttons.
1 [TEMPO/FUNCTION# ]
Selects the desired function/sub-mode.
2 [–/NO] or [+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you
first turn on the power to the Clavinova) is recalled by pressing the [–/
NO]
and [+/YES] buttons simultaneously.
MASTER VOLUME
BRILLIANCE
MELLOW BRIGHT
MIN MAX
DEMO METRONOME
START/STOP
TEMPO
/
FUNCTION
TEMPO
FUNCTION
TEMPO/OTHER VALUE
-
NO YES
+
PRESET
USER 1
USER 2
TRACK
1
TRACK
2
START/STOP
REC
USER 3
SONG
GRAND
PIANO 1
CHURCH
ORGAN
STRINGS
E.PIANO
2
E.PIANO
1
VIBRA-
PHONE
HARPSI-
CHORD
CHOIR E.BASS SPLIT
VARIATION
GRAND
PIANO 2
GRAND
PIANO 3
JAZZ
ORGAN
WOOD
BASS
VOICE
GUITAR/
CLAVI.
ROOM
HALL 1
HALL 2
STAGE
CHORUS
PHASER
TREMOLO
DELAY
HARD
MEDIUM
SOFT
ON
REVERB EFFECT TOUCH TRANSPOSE
3
124 45
Procedure
NOTE
Functions cannot be selected
during Demo/Preset Song
mode or when the user song
recorder is in operation.
NOTE
To cancel the function in Step 2,
3, or 4, press the [TEMPO/
FUNCTION# ] button any
time to exit Function mode.
TEMPO
/
FUNCTION
TEMPO
FUNCTION
TIP
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.