Yamaha MD4S Musical Instrument User Manual


 
66 Advanced recording techniques
—Owner’s Manual
Various playback functions
This section explains the various playback functions offered by the MD4S.
Play forward/backward at various speeds (Cue/Review)
During playback, you can operate the CURSOR shuttle to play forward (cue) or backward
(review) at various speeds. This is a convenient way to find the desired location within a song.
1. Press the PLAY button to begin playback.
2. Move the CURSOR shuttle to right or left to Cue or Review.
The cue/review speed will depend on the angle to which you move the CURSOR shuttle.
Shuttle playback functions
3. If you press the ENTER button while using cue/review, the cue/review will be
locked (xed).
Cue/review will continue even if you release the CURSOR shuttle. When you press the PLAY
button, cue/review will be canceled, and normal playback will resume from that location. If
cue/review reaches the beginning or end of the song, it will stop.
Note: It is not possible to move directly from normal playback to 1/2X speed cue. You must
move the CURSOR shuttle toward the right to select 2X cue or faster, and then return the
CURSOR shuttle to the 1/2X speed cue position.
Note: When 1/2X speed cue is used, the playback pitch will be one octave lower than normal.
(This is the same effect as the 1/2X speed playback explained below.) However, the pitch will
not change for cue/review at other speeds.
CURSOR
shuttle
Speed
Cue (play forward)
Normal playback
1/2X speed 2X speed 4X speed 8X speed 16X speed 32X speed
CueHALF Cue x2 Cue x4 Cue x8 Cue x16 Cue x32
Display
CURSOR
shuttle
Speed
Review (play backward)
Normal playback
1/2X speed 4X speed 8X speed 16X speed 32X speed
Rev x2 Rev x4 Rev x8 Rev x16 Rev x32
Display