Filter
Top Products
Other functions 85
—Owner’s Manual
Titling discs and songs
A title of up to 127 characters can be assigned to each disc and to each song on the disc. This
provides a convenient way to distinguish discs and songs.
Titling a disc
1. Press the EDIT button, rotate the DATA dial to make the display read “Disc
Name,” and press the ENTER button.
If no title has been assigned to the disc, the display will blink “No Title.”
2. Use the CURSOR shuttle to move to the location where you wish to input a
character, and use the DATA dial to select the character.
The input location is shown by a blinking character (or a “■” character). The following char-
acters are available.
Spaces can be inserted between characters.
3. When you have finished inputting the title, press the EDIT button once again
to return to normal operation.
4. Press the TOC WRITE key to update the TOC.
Titling a song
1. Use the SONG SEARCH buttons to select the song that you wish to title.
2. Press the EDIT button, rotate the DATA dial to make the display read “Song
Name,” and press the ENTER button.
The display will indicate the number and title of the selected song. If no title has been
assigned, the display will blink “No Name.” At this time you can rotate the DATA dial to select
a different song number.
3. Rotate the CURSOR shuttle toward the right.
Now you will be able to input the song title.
4. Use the CURSOR shuttle to specify the location at which to input a character,
and use the DATA dial to select a character.
The blinking character (or “■” character) indicates the input location. The available charac-
ters are the same as in the table shown above.
5. When you finish making settings, press the EDIT button once again to return
to normal operation.
Note: When a titled disc is inserted into the MD4S, the title will appear in the display for a
time.
( indicates a space)