Filter
Top Products
Starting Up
14
Starting Up
Use the following procedure to start up the 9000Pro.
1 Make sure that the POWER switch is in the OFF position.
2 Securely plug the “female” end of the
AC power cord supplied with the
9000Pro into the rear-panel AC cord
socket.
3 Plug the power cord into a convenient
AC outlet.
To disconnect the AC power cord, set the POWER switch to OFF, then
unplug the AC power cord from the AC outlet, and disconnect it from the
9000Pro AC INLET.
4 Make all necessary connections (pages 12 and 13), making
sure first that all level controls on those devices are set to
the minimum. (Refer to the owner’s manuals of the devices
you are using for more information on connections.)
Since the 9000Pro has no built-in speakers, you need to monitor its sound
output via external audio equipment. Alternatively, you could use a pair of
headphones.
5 Turn the power ON. If you’ve connected any external
devices to the 9000Pro, turn on the power of those devices
in the following order:
When turning off the power, make sure that all level controls on those devices
above are set to the minimum and simply reverse the above order.
6 Turn up the volume of the external audio equipment, as nec-
essary.
7 After the main display appears, play and adjust the volume.
WARNING
• Make sure your 9000Pro is rated
for the AC voltage supplied in
the area in which it is to be used
(as listed on the rear panel).
Connecting the unit to the
wrong AC supply can cause
serious damage to the internal
circuitry and may even pose a
shock hazard!
• Use only the AC power cord
supplied with the 9000Pro. If the
supplied cord is lost or dam-
aged and needs to be replaced,
contact your Yamaha dealer. The
use of an inappropriate replace-
ment can pose a fire and shock
hazard!
• The type of AC power cord pro-
vided with the 9000Pro may be
different depending on the
country in which it is purchased
(a third prong may be provided
for grounding purposes).
Improper connection of the
grounding conductor can create
the risk of electrical shock. Do
NOT modify the plug provided
with the 9000Pro. If the plug will
not fit the outlet, have a proper
outlet installed by a qualified
electrician. Do not use a plug
adapter which defeats the
grounding conductor.
Press the [POWER] switch. After a
while, the main diaplay below appears.
z MIDI controller x 9000Pro c Audio equipment
12