Filter
Top Products
Mixing Console
Mixing Console
148 Reference
Line Out Settings
This convenient feature allows you to send the output of a selected Part or Parts to the
LINE OUT jacks.
For Drum Parts, you can even select specific drum sounds to be output through these
jacks.
In general, the extensive built-in effects and other Part controls of the 9000Pro provide
all you need for processing and mixing complex multi-Part songs. However, there may
be times when you want to “sweeten” or process a certain Voice or sound with a favor-
ite outboard effect unit, or record a Part to a separate track of a tape recorder. The Line
Out settings are designed just for these kinds of applications.
• When set to “MAIN,” the part is output (with effects) through the MAIN LINE OUT jacks.
The sound is also output through the PHONES jack, as well as the MAIN jacks.
• When set to one of the "SUB" settings, the Part is output through the SUB LINE OUT
jacks. In this case, only Insertion effects (DSP4 - 8 and DSP3 when this is set to “Inser-
tion” from the effect parameter display) can be applied; System effects (DSP1, 2 and
DSP3 when this is set to “System” from the effect parameter display) and MASTER EQ
cannot be applied to the SUB LINE OUT jacks.
• When set to one of the “SUB” settings, the sound of the Part will not be output through
the PHONES jack.
• When set to “SUB1&2,” the Part is output in stereo (1: left, 2: right).
• When set to “SUB3&4,” the Part is output in stereo (3: left, 4: right).
• Settings of “SUB1”, “SUB2”, “SUB3”, and “SUB4” output the Part in mono to the corre-
sponding jack.
• Parts output through the SUB LINE OUT jacks cannot be heard through the PHONES
jack.
Sets the output configuration for the selected drum
sound.
An individual percussion setting overrides the Part
settings made from the display at left. When
assigned to one of the "SUB" settings, DSP effects
cannot be applied to the percussion sound.
Select the desired
part.
Sets the output con-
figuration for the
selected part.
See below for details.
Select the desired
drum instrument.
• When using one of the “SUB”
Line Out settings, make sure
that you’ve connected cables
to the appropriate SUB LINE
OUT jacks on the rear panel. If
cables are only connected to
the MAIN jacks, the sound of
the Part will be output through
the MAIN jacks, even if one of
the “SUB” Line Out settings is
selected.
146