Yamaha PSR-530 Musical Instrument User Manual


 
93
MIDI Functions
Transmit Track
The “Tr.Trk” function selects the track to be transmitted via the transmit
channel specified by the Transmit Channel function, above. The available
settings are as follows:
r1
Tr.Trk
~r1 R1 keyboard voice.
~r2 R2 keyboard voice
~~L L keyboard voice.
~H1 Harmony note 1.
~H2 Harmony note 2.
~H3 Harmony note 3.
rH2 Auto accompaniment rhythm 2 track data.
rH1 Auto accompaniment rhythm 1 track data.
bAS Auto accompaniment bass track data.
CH1 Auto accompaniment chord 1 track data.
CH2 Auto accompaniment chord 2 track data.
Pad Auto accompaniment pad track data.
PH1 Auto accompaniment phrase 1 track data.
PH2 Auto accompaniment phrase 2 track data.
S1 User song melody track 1 data (R1 voice).
S1d User song melody track 1 data (R2 voice).
S2 User song melody track 2 data (R1 voice).
S2d User song melody track 2 data (R2 voice).
S3 User song melody track 3 data (R1 voice).
S3d User song melody track 3 data (R2 voice).
S4 User song melody track 4 data (R1 voice).
S4d User song melody track 4 data (R2 voice).
oFF No data transmitted.
The initial default channel/track
settings are:
Channel 1 = R1 voice
Channel 2 = L voice
Channel 3 = Bass / Track3
Channel 4 = Chord1 / Track4
Channel 5 = Chord2 / Track5
Channel 6 = Pad / Track6
Channel 7 = Phrase1 / Track7
Channel 8 = Phrase2 / Track8
Channel 9 = Rhythm2 / Track2
Channel 10 = Rhythm1 / Track1
Channel 11 = R2 voice
Channel 12 = Harmony1
Channel 13 = Harmony2
Channel 14 = Harmony3
Channel 15 = Off
Channel 16 = Off
When a track is assigned to
more than one MIDI channel,
the data from that track is trans-
mitted via the lowest-numbered
channel.
To avoid MIDI loops which can
cause operational errors, check
the PSR-530 Local Control set-
ting (page 94), and the MIDI
THRU settings of any external
MIDI devices.
MIDI transmit track settings will
be retained even after turning
the power off. See page 98 for
the details.
Receive Channel & Receive Mode
The PSR-530 can simultaneously receive data on all 16 MIDI channels,
allowing it to function as a 16-channel multi-timbral tone generator. The
Receive Channel and Receive Mode functions determine how each channel
will respond to received MIDI data.
Receive Channel
The “Rcv.Ch” function selects a MIDI channel to which a receive mode is
to be assigned via the Receive Mode function, below. First select a receive
channel, then the receive mode for that channel. Any of the standard MIDI
channels — 1 through 16 — can be specified.
01
Rcv.Ch