Zoom 7072 Guitar User Manual


 
ZOOM 707II GUITAR
13
1.
When wishing to use a SmartMedia
card, turn power to the 707II off,
insert the SmartMedia card into the
card slot, and then turn power on
again. (For information on inserting a
SmartMedia card, see p. 6.)
Before using a SmartMedia card in the 707II, it
must be formatted (
p.31).
Never insert or remove the SmartMedia card
while power to the unit is turned on. Otherwise all
data on the card may be lost.
2.
Connect the input source to the
[INPUT] jack or [AUX IN] jack.
3.
Turn power to the 707II on and press
the [SAMPLER] key in play mode.
For patches in which the expression pedal is
assigned to SAMPLER, the sampler function
can also be turned on by pushing the pedal all
the way down (
p.24).
The subsequent steps are slightly different,
depending on whether a SmartMedia card is
inserted or not.
SmartMedia card not inserted
The following indication appears on the display,
and the unit goes into the sampler standby
mode. Proceed to step 4.
SmartMedia card inserted
The following indication appears on the display,
and the unit goes into the sampler standby
mode. The sample number is shown on the
[BANK/PATCH] indicator.
When using a SmartMedia card, the samples on
the card are assigned numbers from 1 – 60. If
necessary, use parameter knob 1 to select a
number. Then proceed to step 4.
1
SP NO
SAMPLE
AUX IN
INPUT
Guitar
CD player
NOTE
Using the Sampler Function
The 707II incorporates a sampler function that allows recording the input signal in the internal
memory or on a SmartMedia card.
This can be used to record a phrase from the guitar connected to the [INPUT] jack or the
sound from an external source such as a CD player connected to the [AUX IN] jack. When
using the internal memory, the maximum recording duration is 6 seconds (1 sample). When
using a 16 MB SmartMedia card, up to 4 minutes (maximum 60 samples) can be recorded. A
recorded phrase can also be played at slower speed without changing the pitch. This is
convenient to copy a fast-played phrase from a CD.
For playing a sample, you can choose between two modes: "one-shot playback" where the
sampled phrase is played once when you operate a key or pedal, and "loop playback", where
the sampled phrase continues to play until stopped.
Listening to Patches (Play Mode Operation)