Filter
Top Products
WER
A0
While playing your instrument, operate the
knobs on the panel.
Each knob controls a certain parameter,
as indicated below.
Selects the
distortion type
for the DRIVE
module.
Adjusts the modulation rate of
chorus, flanger, and similar
effects. For some patches, the
knob adjusts the echo level.
◆
For a list of parameters adjusted with the
knobs, see p. 33 – 38.
◆
To edit a patch more in detail, see p. 18.
◆
For a detailed explanation of patch storing, see p. 20.
◆
For information on how to return the USER group
patches to the factory default condition, see p. 32.
Parameter knob 1
Adjusts the distortion level of the
DRIVE module.
Adjusts the reverb and echo level.
Press the [STORE/EXECUTE]
key.
The 707II goes into store standby mode.
If a patch from the PRESET group was
selected, "A0" in the USER group is
automatically selected as store target.
Use the [W]/[Q] foot
switches to select the store
target bank and patch
number.
To carry out the store operation,
press the [STORE/EXECUTE] key
once more.
To cancel the process, press the [CANCEL/
EXIT] key.
[DRIVE VARIATION] key
Parameter knob 2
Changing the sound of a patch
Storing an effect
A0
Parameter knob 3
[DRIVE] knob
1
2
3
1
9
ZOOM 707II GUITAR
Quick Guide (Let's Play)