Filter
Top Products
Other Functions
Using the Hold Delay Function
21
1.
In play mode, select the patch to use
with hold delay.
2.
Press the [EDIT] key to activate edit
mode, and select "HLDDLY" as effect
type for the DLY/REV module.
3.
Use parameter knob 1 to set the TIME
parameter.
The TIME parameter determines the length of
the recording interval for hold delay. Turning
the knob changes the value as follows.
●
1 – 99:
10 – 990 milliseconds (10-ms units)
●
1.0 – 2.0:
1.0 – 2.0 seconds (100-ms units)
●
Mn (Manual):
Recording starts when you
press the [
Q
] foot switch and ends when you
press the [
Q
] foot switch again (max. 2
seconds).
4.
Use parameter knob 2 to set the
MODE parameter.
The MODE parameter determines how the
recorded phrase is played back. The following
three modes are available.
●
nL (Normal):
Normal direction playback
●
So (Sound-on-sound):
Recorded contents
are played back repeatedly to create an overlay.
If you press the [
Q
] foot switch, the phrase
played until the switch is pressed again is added
to the sound.
●
rS (Reverse):
Reverse direction playback.
5.
Use parameter knob 3 to set the MIX
parameter.
The MIX parameter controls the mixing ratio of
the delayed sound. A setting of 30 results in
equal levels of direct sound and delayed sound.
6.
Press the [PEDAL] key a few times
until the [PEDAL] LED of the REV
module flashes.
The expression pedal can now be used to switch
the hold delay function on and off.
7.
Store the patch and return to play
mode.
When a patch in which hold delay can be used
is selected in play mode, the DLY/REV module
LED and the [PEDAL] LED are flashing.
8.
Push the expression pedal all the way
down.
The hold delay function is switched on and the
unit is in recording standby mode. The
indication "STOP" is shown on the display.
9.
While playing your guitar, press the
[
Q
] foot switch to start recording.
The indication "REC" is shown on the display.
The actual operation depends on the TIME
parameter set in step 3.
STOP
Other Functions
The 707II also incorporates various other convenient functions which are described in this
section.
ZOOM 707II GUITAR
The DLY/REV module comprises a hold delay effect that allows recording and playing a
guitar phrase of up to 2 seconds. You can also play the phrase in reverse or perform loop
playback to create interesting "sound-on-sound" layers.