Filter
Top Products
Changing the Sound of a Patch (Edit Mode)
Changing the Sound of a Patch
(Edit Mode)
Patch Configuration
Basic Edit Mode Steps
18
ZOOM 707II GUITAR
Within each module, there are several different but related effects which are called effect types. For
example, the MODULATION module comprises effect types such as CHORUS, PHASER, and WAH.
The elements that determine the sound of a patch are called effect parameters. Each module has several
effect parameters, whose value can be adjusted with the parameter knobs 1 – 3, the [DRIVE] knob,
[DRIVE VARIATION] key, etc.
Also within the same module, different effect types will have different parameters.
NOTE
The edit mode allows you to freely alter the parameters that make up a patch, so that you
can create your own patches. This section describes how to edit patches and how to store
edited patches.
Each patch of the 707II consists of several effects (effect modules), as shown in the
illustration below. A patch is a combination of modules, each with their distinct parameter
settings.
BOOSTER
INPUT OUTPUT
ISO/COMP DRIVE EQ ZNR CABINET MODULATION DLY/REV
This section describes the basic procedure for editing patches. For information on effect
types and parameters in the various modules, see p. 33 – 38.
1.
In play mode, select the patch you
want to edit.
Patches for editing can be selected from either
the USER group or the PRESET group.
However, the PRESET group does not allow
storing. When you have altered a patch from the
PRESET group and want to store it, "A0" in the
USER group is automatically selected as store
target.
2.
Press the [EDIT] key.
The 707II switches to the edit mode. The LED
of the module currently selected for editing
flashes. (The first time you switch to edit mode
after the unit was turned on, the TOTAL module
will be selected.)
3.
Use the MODULE [
E
]/[
R
] keys to
select the module you want to edit.
Modules are switched in the order shown below,
and the respective module LED is flashing.
The display shows the effect type currently
selected for that module. If the effect can be
controlled with the expression pedal, the
indication "Pd" is shown on the [BANK/
PATCH] indicator.
BOOSTER
ISO/COMP
DRIVE EQ ZNR CABINET
MODULATION
DLY/REV TOTAL