set service-profile ssid-name 307
set service-profile
ssid-name
Configures the SSID name in a service profile.
Syntax —
set service-profile name ssid-name ssid-name
■ name — Service profile name.
■ ssid-name — Name of up to 32 alphanumeric characters, with no
spaces.
Defaults — The default SSID name is private.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command applies the name guest to the
SSID managed by service profile clear_wlan:
WX4400# set service-profile clear_wlan ssid-name guest
success: change accepted.
See Also
■ “set service-profile ssid-type” on page 307
set service-profile
ssid-type
Specifies whether the SSID managed by a service profile is encrypted or
unencrypted.
Syntax —
set service-profile name ssid-type [clear | crypto]
■ name — Service profile name.
■ clear — Wireless traffic for the service profile’s SSID is not encrypted.
■ crypto — Wireless traffic for the service profile’s SSID is encrypted.
Defaults — The default SSID type is crypto.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command changes the SSID type for service
profile clear_wlan to clear:
WX4400# set service-profile clear_wlan ssid-type clear
success: change accepted.
