xv
Password Validation Timeout 5-37/7-39
Controller Unique Identifier
5-37/7-39
SCSI Drive Utilities
5-40/7-42
Low-level format 5-40/7-43
5.15/7.15
Read/Write test 5-41/7-44
Chapter 8 Fibre Operation
Page number
Host and Drive Parameters
8-6
View and Edit Fibre Channel
8-6
Channel Mode 8-6
Primary and Secondary Controller IDs 8-6
Communications Channel (for cache coherency) 8-7
View Channel WWN 8-7
View Device Port Name List (WWPN) 8-8
View and Edit Fibre Drives
8-8
User-Assigned ID (Scan Fibre Drive) 8-8
View Drive Information 8-9
View and Edit Host-side Parameters 8-9
Fibre Connection Types 8-10
View and Edit Drive-side Parameters 8-10
Connecting Drives with Dual Loop 8-10
Controller Unique Identifier 8-11
8.5
Controller Communications over Fibre Loops 8-12
Multi-host Access Control: LUN Filtering
8-14
Creating LUN Masks 8-15
WWN Name List 8-16
Logical Unit to Host LUN Mapping 8-16
LUN Mask (ID Range) Configuration 8-18
Filter Type: Include or Exclude 8-18
Access Mode: Read Only or Read/Write 8-19
8.5
Configuration Procedure 8-20
Chapter 9 Advanced Configurations
Page number
9.1 Fault Prevention
9-1
Clone Failing Drive 9-2
Replace after Clone 9-2
Perpetual Clone 9-3
S.M.A.R.T. with enhanced features
9-5
S.M.A.R.T. Features (Enabling S.M.A.R.T.) 9-7
“Detect Only” 9-7
"Detect, Perpetual Clone" 9-7
9.1.2
“Detect, Clone + Replace” 9-8
9.2 Host-side & Drive-side SCSI Parameters
9-11
Host-side SCSI Parameters
9-11
Number of Tags Reserved for each Host-LUN
Connection
9-12
Maximum Queued I/O Count 9-13
LUNs per Host SCSI ID 9-13
LUN Applicability 9-13
Peripheral Device Type 9-14
In-band SCSI/Fibre 9-14
Peripheral Device Type for Various Operating Systems 9-15
9.2.1
Peripheral Device Type Settings 9-15
