Hardware
Site Preparation
Table 2-2: Specifications
_ _______________________________________________________
LCS60 Network Interface for Ethernet
_ _______________________________________________________
Power Requirements 90 to 132 VAC (47 to 63 Hz), 5 Amps
180 to 250 VAC (47 to 63 Hz), 2.5 Amps
41 to 60 VDC, 8 Amps
Operating Temperature 10 to 45°C
Storage Temperature −40 to 54°C
Operating Humidity Long-Term 20 to 55%
Short-Term 20 to 80%
Storage Humidity
10 to 95%
_ _______________________________________________________
Fiber Interface
_ _______________________________________________________
Fiber Core Size 62.5 microns
Mode Multi-mode
Fiber Optic Cable FL2P-P Type
Connector
ST Type
_ _______________________________________________________
Ethernet Interface
_ _______________________________________________________
Interface IEEE 802.3
Connector
Female 15-pin DB15
_ _______________________________________________________
Console/Terminal Interfaces
_ _______________________________________________________
Port 1 (console) RS-232C (limited) Asynchronous
Ports 2,3,4 (terminal) RS-232C Asynchronous
Connectors
25-pin DB25 (receptacle)
_ _______________________________________________________
Serial Port Defaults
_ _______________________________________________________
Port 1 9600 bps
Port 2 9600 bps
Port 3 9600 bps
Port 4 1200 bps
_ _______________________________________________________
_ _______________________________________________________
Issue 3 2-3
