Filter
Top Products
Your First Session: Chapter 2
QSR Reference Manual 6
AUDITIONING MIX PLAY MODE
Mix Play Mode allows you to assign a Program to each of the 16 MIDI channels. This
makes it easy to create multitimbral setups for use with an external MIDI sequencer.
Additionally, a MIX can be used to “layer” sounds together, or “split” your keyboard
in a number of ways, or any combination of these. There are many different ways to
program a Mix. For more about Mix Play Mode, refer to Chapter 5. For more about
connecting the QSR to a MIDI sequencer, see Chapter 3.
➀ Press the [MIX] button.
The [MIX] button and the MIX indicator in the display will light. The Mix will be
whatever was selected when last in Mix mode (Mix number 00 – 99).
➁ Select a Mix using the [VALUE] knob.
The large number in the upper-left section of the display will indicate the currently
selected Mix number. When you scroll past 99, the counter will “roll-over” to Mix 00 of
the following Bank. Likewise, if you scroll back before 00, it will roll back to Mix 99 of the
preceeding Bank.
SELECTING MIX BANKS
The QSR provides five internal Banks containing 100 Mixes in each. The currently
selected Bank will be shown in the display just below the name of the currently
selected Mix’s name.
• Use the BANK SELECT [DOWN] and [UP] buttons to select a Bank (User, Preset 1
– 3, GenMIDI or any Card Banks, if present).
User and Preset Banks are described in detail in Chapter 4.