Filter
Top Products
Overview: Chapter 4
QSR Reference Manual 10
To audition Programs before overwriting them with STORE
…when editing a Program in Mix Play Mode:
➀ While in Mix Program Edit mode, press [PROG].
This selects Program Play Mode, retaining your edits to the Program in Mix Edit.
➁ Use the BANK SELECT [DOWN] and [UP] buttons to select the User Bank. If a
RAM card is inserted, use the BANK SELECT [DOWN] and [UP] buttons to select
a Card Bank.
➂ Use the [VALUE] knob to scroll through the Programs until you find one you wish
to overwrite with the new edited Program. Take note of the number.
➃ Press [MIX].
This recalls the edit buffer in Mix Mode, which contains your edited Program.
➄ Press [EDIT] twice, until “PROG EDIT” appears under the MIX number in the
display.
➅ Press [STORE].
The top line of the display will read “
Save Program to USER xxx” where
XXX is a User Program number from 000—127. Optional: If the location you noted was
on a RAM card, use BANK SELECT [UP] to select the Card Bank.
➆ Use the [VALUE] knob to select the Program Number you noted in step 5.
➇ Press [STORE] again.
The Program is now stored.
At this point your edited Program is stored, however the Mix your were auditioning
before storing the Program still has the old Program number assigned (if the edited
Program was saved to a different Program number location). Therefore, you need to
store the Mix as well.
➈ Press [MIX].
This selects Mix Play Mode.
➉ Press [STORE] twice.
The Mix is now stored.