Editing Mixes: Chapter 5
QSR Reference Manual 8
To turn on the Group function for a channel in a Mix:
➀ From Mix Play Mode, press [EDIT].
➁ If necessary, use the [
▲
MIDI CH
▲
] buttons to move the cursor to the upper
line of the display. Then turn the [VALUE] knob until the Keyboard/MIDI
function is displayed.
➂ Press the [CURSOR
▲
] button to advance the cursor to the lower line and turn
the [VALUE] knob until Page 3 is selected.
You will see "MIDI Group: " in the middle of the display.
➃ Use the [
▲
MIDI CH
▲
] buttons to select a channel in the Mix.
➄ Press the [CURSOR
▲
] button to advance the cursor and turn the [VALUE]
knob clockwise to turn on the Group parameter.