Filter
Top Products
Overview: Chapter 4
QSR Reference Manual 11
COPYING SOUNDS BETWEEN PROGRAMS
Follow the steps below to copy one of the four Sound layers from one Program to
another Program in the User Bank. When copying Sounds between Programs, the
“new” Sound will replace the same numbered Sound in the destination Program, i.e.,
Sound 3 will replace Sound 3.
➀ Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Sound you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁ Press [STORE].
The [STORE] button will begin to flash.
➂ Press [CURSOR
▲
] once to advance to Page 2.
The upper section of the display will read:
COPY S OUND 1 TO
SOUND 2 (STR)
➃ Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy
from the currently select Program, or to select the Program Number in the User
Bank you wish to copy the Sound from (000–127).
➄ Press [CURSOR
▲
] once to advance the cursor to the Program number value in
the lower section of the display.
➅ Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy
to in the currently select Program, or to select the Program Number in the User
Bank you wish to copy the Sound to (000–127). ).
➆ Press [STORE] to complete the copy function.
COPYING EFFECTS BETWEEN PROGRAMS
Follow the steps below to copy the Effects Patch from one Program to another
Program in the User Bank.
➀ Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Effects you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁ Press [STORE].
The [STORE] button will begin to flash.
➂ Press [CURSOR
▲
] three times to advance to Page 3.
The upper section of the display will read:
COPY E FFECT TO
PROG 000 (STR)
➃ Use the [VALUE] knob to select the Effects Patch of the currently selected
Program, or any Program (000 - 127) in the User Bank to copy from.