Filter
Top Products
Microphone control by delegate with override - is useful for smaller discus-
sions where participants are given active status by activating a contribution
unit key. The microphone of the speaker who has been speaking the longest
is automatically switched off. No operator action is required.
There is no request-to-speak list (this mode is sometimes called ‘first-in-first-
out’ or FIFO mode). The maximum number of active microphones (speak-
ers) can be preset by the operator.
When a participant presses the microphone on/off key on the delegate unit,
it is automatically switched on and the delegate receives active status (indi-
cated by an illuminated red LED).
Microphone control by delegate with voice activation - is useful in active
discussions in which participants activate their microphones by speaking
(no on/off key is required). They are automatically given active status
(speaker) while speaking. No operator action is required.
The number of simultaneous active status microphones (speakers) can be
preset by the operator.
NOTE: ‘Microphone control by delegate with voice activation’
mode is not possible in multi-CCU systems. Only one voice-activated micro-
phone can be connected to a Dual Audio Interface Unit (DAI).
NOTE: Operator control and microphone status monitoring are not possible
in ‘Microphone control by delegate with voice activation’ mode.
MICROPHONE MANAGEMENT
Synoptic Microphone Control Digital Congress Network
Software User Manual Page 1-6
2