Filter
Top Products
Microphone Control By - this part of this dialogue box is for selecting the
microphone mode. To do so:
• Click on the desired ‘Microphone Control By’ radio button.
In addition to allowing selection of the microphone mode, the ‘System
Microphone Mode’ dialogue box also allows you to specify two other para-
meters, ‘Microphone Settings’ and ‘Active Mics’.
Microphone Setting - this part of the dialogue box allows you to give dele-
gates the ability to cancel a request-to-speak. The default setting is enabled,
meaning delegates can cancel requests to speak. To disable this function:
• Click on the ‘Allow Cancel Request’ check box in ‘Microphone Settings’.
The tick mark (√) will disappear to indicate this option is disabled.
NOTE: This option is only available for ‘Operator with Request List’,
‘Operator with Request and Response List’ and ‘Delegate with
Request List’ modes. For the other two modes, this option button is not dis-
played.
In this part of the dialogue box, there is also an option which allows dele-
gates to switch their own microphones off. This option is only available in
‘Operator with Request List’ mode and ‘Operator with Request and
Response List’ mode. The default setting is enabled, meaning delegates can
switch off their microphones. To disable this function:
• Click on the ‘Allow Microphone Off’ check box in ‘Microphone
Settings’.
The tick mark (√) will disappear to indicate this option is disabled.
Active Mics - you can specify the number of active delegate microphones
permitted (the length of the speakers list). The minimum is one and the
maximum is four. To do so:
• Click on the desired radio button in ‘Active Mics’.
NOTE: When ‘Delegate with Voice Activation’ is selected, the mini-
mum number of active microphones is two, not one. The maximum number is
still four.
PREPARING FOR A CONFERENCE
Synoptic Microphone Control Digital Congress Network
Software User Manual Page 3-14
3