Filter
Top Products
16
Quick Start
The SP-505’s display
Broadly speaking, the SP-505 displays two types of screens.
Parameter list display
fig.00-06
The scroll bar in the right of the screen shows the current
location of the cursor relative to the entire list.
● Press CURSOR [↑] [↓] to move the cursor up or down in
steps of a single line.
● Press [PAGE UP][PAGE DOWN] to move the cursor in
steps of an entire page.
● Use the VALUE dial to edit the parameter.
Wave display
fig.00-07a
● Press [L/R] to switch between the left channel (Lch) and
right channel (Rch) of a stereo sample.
● Press [ZOOM IN][ZOOM OUT] to zoom-in or zoom-out
on the horizontal axis (time axis) of the waveform.
● Hold down [L/R] and press [ZOOM IN][ZOOM OUT]
to expand or shrink the vertical axis (amplitude axis) of
the waveform.
● Press CURSOR [←][→] to move the displayed area of the
waveform in the horizontal direction.
● Use the VALUE dial to move the wave pointer.
Sub-window display
You can switch sub-windows by pressing the following six
buttons.
[PAD BANK]
[PAD ACCENT]
[BPM/TAP]
[FX INFO]
[FX SELECT]
[FX ASSIGN]
(Example) When you press [PAD BANK]
fig.00-07b
In a sub-window, you can press [EXIT] to return to the
previous screen.