Filter
Top Products
21
Quick Start
Quick Start
Applying effects
The SP-505 contains 26 different effects.
You can use these effects to modify the sound of the sampled
phrases.
fig.00-19a
1. Turn on the POWER switch of the SP-505.
2. Press pad [1].
The sample will play.
3. Press [FX ASSIGN] in the Effect section.
4. Press the pad to which you want to apply an effect.
For this example, press pad [1] so that [1] is highlighted.
fig.00-19b
5. Press [EXIT].
6. Press [FX ON/OFF] in the Effect section, illuminating
the button.
7. Once again press pad [1].
The effect will be applied to the sound of the preset
sample.
8. If you want to see the current effect settings, press [FX
INFO].
The display will show the currently selected effect name,
and the parameters that can be controlled by the CTRL
1–3 knobs.
fig.00-20
9. To change the effect, press [FX SELECT].
A list of the effects will be displayed.
Effect nos. 1–16 can be selected directly by pressing pads
[1]–[16]. For effect no. 17 and higher, turn the VALUE
dial to select the effect, and press [ENTER] to confirm
your selection.
10. To turn off the effect, press [FX ON/OFF] to make the
button go dark.
11. Press [EXIT] to return to the Play screen.
9
5
11
6,
10
3
18
2,4,7