Filter
Top Products
Ensure that the following items were received with your shipment:
Introduction ~ Unpacking
4
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
ClearOne is not responsible
for product damage
incurred during shipment.
You must make claims directly with
the carrier. Inspect your shipment
carefully for obvious signs of
damage. If the shipment appears to
be damaged, retain the original
boxes and packing material for
inspection by the carrier. Contact
your carrier immediately.
Unpacking
!
Figure 1.1. Equipment included with XAP 800 unit
Front panel
A. LCD. This display is for XAP 800 setup in conjunction with the four
associated front-panel buttons [B, C, and D]. Baud rate and flow control
must be configured from the front panel; see the LCD Menu Tree on page 13
for the location of these in the menu system. Other functions accessed via
the front panel include system options, RS-232 configuration,
troubleshooting, and level readings.
B. Enter. This button is used when programming the XAP 800 via the LCD
window. To move deeper in the menu or execute a selected parameter, press
the Enter button.
Controls and Connections
Figure 1.2. Front panel controls
All front panel buttons are
also used to enter the front
panel passcode. See
Security (page 26) for more details.
✍