Filter
Top Products
X%
=
Internal temperature Degrees Celsius
X^
=
Dirty status
0 = RAM has been saved to Flash (OK to power off/reset)
1 = RAM needs to be saved to Flash
X&
=
Unit name A text string of up to 24 characters drawn from the alphabet (A–Z) digits (0–9),
minus sign/hyphen (-). No blank or space characters are permitted as part of the
name. No distinction is made between upper and lower case. The first character
must be an alphabet character. The last character must not be a minus sign/
hyphen.
X*
=
Model name
X1)
=
Preset number 16 presets (1–16)
X1@
=
Inputs Four inputs (1–4)
X1#
=
Outputs Four outputs (1–4)
X1$
=
Group number Sixteen groups (1–16)
X1%
=
Parameter number
6 = G, 12 = M
X1^
=
Soft limit High value
X1&
=
Soft limit Low value
X1*
=
Group master value For gain values with a resolution to 0.1, multiply by 10.
Mute values: 0=Mute or 1 = unmute.
Special Characters
The HTML language reserves certain characters for specific functions. The device will not
accept these characters as part of preset names, the device name, or locally created file
names.
The DMP 44 LC rejects the following characters:
{space (spaces are acceptable for names)} + ~ , @ = ‘ [ { } < > ’ “ semicolon (;)
colon (:) | \ and ?.
Command/Response Table for Basic DMP 44 LC SIS Commands
Command
ASCII Command
(Host to Tuner)
Response
(Tuner to Host)
Additional Description
NOTE: Commands can be entered back-to-back in a string, with no spaces. Example: TvprS25*11•3
General commands
Firmware Version, Part Number, and Model Information
Query rmware version
Q
X! ]
Show the current firmware
version.
Query rmware and build
version
*Q
X@ ]
Show the current firmware
and build version.
Query part number
N
60-1095-01
]
Show the unit part number.
Query model name
1I
DMP
•
44
•
LC
]
Show the model name.
Query model description
2I
Digital
•
Matrix
•
Processor
]
DMP 44 LC • SIS Programming and Control 42