Filter
Top Products
Command
ASCII Command
(Host to Tuner)
Response
(Tuner to Host)
Additional Description
Audio group master commands
NOTE: • See Group Masters, for more information about audio group masters.
• A group must have assigned members for these commands to have an effect.
• For
X6^
, a positive (+) value is assumed unless a negative (-) value is specified.
• If entering a
X6^
value outside the valid range for the group or outside the soft limits, the DMP 44
responds with an “invalid parameter” (E13) error.
•
X6^
,
X6&
, and
X6*
values can be sent without leading zeroes; responses are always 5 digits.
Set a group fader control
E
D
X6%
*
X6^
GRPM
}
Grpm
X6%
*
X6^]
Set the group fader to a value of
X6^
.
Example:
E
D2*-293GRPM
}
GrpmD02*-
00293GRPM
]
Set the group 2 fader control to
-29.3 dB.
Raise a group fader control
E
D
X6%
*
X6&
+GRPM
}
Grpm
X6%
*
X6^]
Increase the level of the
X6%
group fader by
X6&
dB.
Example
E
D2*30+GRPM
}
GrpmD02*-
00263*GRPM
]
Raise the group 2 fader 3 dB
(from -29.3 dB to -26.3 dB,
starting from the level set in
the “Set a group fader control”
example, above.
Lower a group fader control
E
D
X6%
*
X6&
-GRPM
}
Grpm
X6%
*
X6^
]
Decrease the level of the
X6%
group fader by
X6&
dB.
View the group fader control
level
E
D
X6%
GRPM
}
Grpm
X6%
*
X6^
]
In verbose modes 1 and 2, the
response is simplified to
X6^]
.
Mute a group mute control
E
D
X6%
*1GRPM
}
GrpmD
X6%
*+00001
]
Mute all blocks in group
X6%
.
Clear (unmute) a group mute
control
E
D
X6%
*0GRPM
}
GrpmD
X6%
*+00000
]
Umute all blocks in group
X6%
.
View a group mute control
E
D
X6%
GRPM
}
GrpmD
X6%
*
X6$
]
For group masters,
X6$
is always
expressed as a positive or negative
5-digit value.
Set soft limits
E
L
X6%
*
X6*
upper
*
X6*
lower
GRPM
}
GrpmL
X6%
*
X6*
*
X6*
]
Set the groups soft limits to
X6*
and
X6*
.
Example:
E
L2
*
+60
*
-60GRPM
}
GrpmL2*+00060*
-00060
]
Set the upper soft limit for the
group 2 fader to +6.0 dB and the
lower limit to -6.0 dB.
View soft limits
E
L
X6%
GRPM
}
GrpmL
X6%
*
X6*
*
X6*
]
In verbose modes 0 and 1,
the response is simplified to
X6*
*
X6*
]
.
View group type
E
P
X6%
GRPM
}
GrpmP
X6%
*
X6(
]
Show the group type (
X6(
) for
group
X6%
. In verbose modes 0
and 1, the response is simplified
to
X6(
]
.
View group members
E
O
X6%
GRPM
}
GrpmO
X6%
*
X6)
1*
X6)
2*
...*
X6)
16
]
X6)
is the control or mix point.
In verbose modes 0 and 1,
the response is simplified to
X6)
1
*
X6)
2
*...*
X6)
16
]
.
DMP 44 LC • SIS Programming and Control 49