Filter
Top Products
SK-96370-144PMC-GDC User Guide
Chapter 4 Connectors
© Fujitsu Microelectronics Europe GmbH - 25 - FMEMCU-UG-960014-10
4.4 CAN Connector (X6, X8)
Two 9-pin D-Sub male connectors are used for the CAN interfaces CAN0 and CAN1. Both
CAN interfaces can be used simultaneously.
Figure 4-3: CAN Connector
Pin Number Pin Signal Description
1 NC Not used
2 CANL LOW-level CAN voltage input/output
3 GND Ground
4 NC Not used
5 NC Not used
6 NC Not used
7 CANH HIGH-level CAN voltage input/output
8 NC Not used
9 NC Not used
Shield GND Ground
Table 4-2: CAN Connector Signals