Filter
Top Products
Quick Start
11
Quick Start
2. Normal mode
Selecting a program
Here’s how you can select and play program C-3 (pro-
gram 3 of bank C).
1. Make sure that you are in Normal mode.
The program number will be shown at the left of the
display.
If you are not in Normal mode (i.e., if the [EX MODE]
key, [EDIT] key, or [GLOBAL] key LEDs are lit) press
the lit key once. If the [EDIT] key or [GLOBAL] key
LEDs are lit, you can also return to Normal mode by
pressing the [EXIT] key.
When you turn on the power, you will automatically
be in Normal mode.
2. [Press the [-] or [+] key to select bank C, and press
the PROGRAM [3] key.
Program C-3 will be selected, and the display will
show the program number and program name.
Playing
Playing using the Program’s drawbar
settings
Here's how to use the drawbar settings stored as part of a
program instead of using the front panel Drawbar 1 or 2
settings.
1. Select a program in Normal mode.
Use the [-] [+] keys to select the bank, and the PRO-
GRAM [1]–[8] keys to select the number.
2. In both the upper and lower DRAWBAR SELECT
sections, press the [DRAWBAR PRESET] key to
make the key LED light.
3. Play the keyboard.
The upper keyboard will use the “UPPER” parameter
settings of the program, and the lower keyboard will
use the “LOWER” parameter settings of the program.
1.
Listening to the demo songs
Here's how to listen to the demo songs.
The BX-3 contains nine demo songs. For the song titles,
refer to “3. Voice name list” (p.40).
1. Turn on the power.
2. Press the [GLOBAL] key.
The [GLOBAL] key LED will light.
3. Press the PROGRAM [8] key, and then press the
[WRITE/ENTER] key.
4. Press the [WRITE/ENTER] key once again.
The demo will begin playing.
When the first song ends, the next song will begin.
5. To stop the performance, press the [EXIT] key.
After pressing the [WRITE/ENTER] key in step 3,
you can press the [-] or [+] keys to select a specific
demo song .