Filter
Top Products
Parameters
27
Rotor Up Transit (Rotor Up Transition) [0...99]
Adjusts the time over which the rotor rotation changes
from slow to fast.
Rotor Down Transit (Rotor Down Transition) [0...99]
Adjusts the time over which the rotor rotation changes
from fast to slow.
Fast Speed
Slow Speed
Fast
Up Transit Down Transit
Slow
Speed
Time
Rotor Stop Transit (Rotor Stop Transition) [0...99]
Adjusts the time over which the rotor rotation actually
comes to a stop after you stop the rotation.
Rotor Strt Transit (Rotor Start Transition) [0...99]
Adjusts the time over which the rotor reaches the speci-
fied speed after it begins to rotate.
Slow or Fast Speed
Stop
Start Transit Stop Transit
Start
Speed
Time
When Rotary is on
Horn Mic Distance [0...99]
Adjusts the distance between the horn and the mic.
Horn Mic Spread [0...99]
Adjusts the distance between the “simulated mics” to
increase the stereo field.
Rotor Mic Distance [0...99]
Adjusts the distance between the rotor and the mic.
Rotor Mic Spread [0...99]
Adjusts the distance between the “simulated mics” to
increase the stereo field.
Mic Distance
Mic Distance
Mic Spread
Horn
Rotor
Group 7: Controller
Mod Wheel (Modulation Wheel)
[No Assign...ExLowLevl]
Select the parameter that will be controlled by the front
panel modulation wheel.
If this is set to other than No Assign, Rtry FAST, or Wheel
Brake, the result of moving the wheel will depend on the
setting of the “Mod Wheel Range.”
No Assign: Nothing will be controlled.
Click Level: Control the “On Click Level” and “Off Click
Level” parameters (Group 1).
Perc Level (Percussion Level): Control the “Perc Nrml
Level” parameter (Group 3).
Perc Decay (Percussion Decay): Control the “Perc Fast
Decay” parameter (Group 3).
Rtry FAST (Rotary Fast/Slow): Control the front panel
ROTARY [FAST] key. The modulation wheel will function
as a switch, and will select Fast when the wheel is moved
toward yourself, and Slow when moved away from
yourself.
Rtry Speed (Rotary Speed): Control the “Horn Fast
Speed,” “Horn Slow Speed,” “Rotary Fast Speed,” and
“Rotary Slow Speed” parameters (Group 6).
Wheel Brake: Control the “Wheel Brake” parameter
(Global mode Group 7). The modulation wheel will
function as a switch, and will turn on the wheel brake
effect when the modulation wheel is moved away from
yourself, and will turn off the wheel brake effect when
moved toward yourself.
ExLowrLevl (EX Lower Level): Control the “EX LOWER”
parameter (Group 2).
Mod Wheel Range (Modulation Wheel Range)
[-99...+99]
When the “Mod Wheel” parameter is set to other than No
Assign, Rtry FAST, or Wheel Brake, the range of the effect
controlled by operating the modulation wheel can be
adjusted from a maximum of 0 to a maximum of 99.
When you move the modulation wheel fully toward
yourself, the parameter being controlled will be at its own
original setting.
When you move the modulation wheel fully away from
yourself, the value you specify here will be added to the
original value of the parameter being controlled. How-
ever, the total value is limited to a range of 0 to 99.
If the “Perc Nrml Level” parameter is set to 50, the
following Mod Wheel Range settings will allow the
position of the modulation wheel to change the percus-
sion level as follows.
+20: The percussion level will be 50 when the modulation
wheel is fully toward yourself, and 70 when fully away
from yourself.
-20: The percussion level will be 50 when the modulation
wheel is fully toward yourself, and 30 when fully away
from yourself.
If the “Perc Nrml Level” parameter is set to 99, the
following Mod Wheel Range settings will allow the
position of the modulation wheel to change the percus-
sion level as follows.
+99: The percussion level will be 99 when the modulation
wheel is fully toward yourself, and 99 when fully away
from yourself (since the controllable range is 0–99).
-99: The percussion level will be 99 when the modulation
wheel is fully toward yourself, and 0 when fully away
from yourself.