Filter
Top Products
42
5. Pattern mode
Checking motion data
If motion sequence data has been recorded, you can hold down
the SHIFT key and press the MOTION SEQ key to view the sta-
tus in the step keys.
• If motion sequence (selected part data) is included
Step keys 1, 2, 3, 4 will light
• If effect motion sequence (EDIT 1 data) is included
Step keys 5 and 6 will light
• If effect motion sequence (EDIT 2 data) is included
Step keys 7 and 8 will light
• If delay motion sequence (delay depth data) is included
Step keys 9 and 10 will light
• If delay motion sequence (delay time data) is included
Step keys 11 and 12 will light
It is not possible to check motion sequence data during play-
back, recording, or sampling, nor during Pattern Set Play .
Playing a delay motion sequence
A "delay motion sequence" is a special motion sequence just for
the delay effect. Unlike a motion sequence for a part, the move-
ments of two knobs, DELAY DEPTH and DELAY TIME, can be
recorded simultaneously. The playback method is the same as for
SMOOTH playback of a part motion sequence.
There will be no ef fect if the delay MOTION SEQ is of f (dark).
Recording a delay motion
sequence
Movements of the two knobs DELAY DEPTH and DELAY TIME
can be recorded. If BPM SYNC is on (lit), the motion sequence
will synchronize to the tempo of the delay time.
1. Select the pattern that you wish to edit.
2. Turn the delay MOTION SEQ key on (lit).
3. Press the Rec key to enter record-ready mode. (The Rec key will
light, and the Play/Pause key will blink.)
4. Press the Play/Pause key to start the pattern. (The Rec key and
Play/Pause key will light.)
5. Move the DELAY DEPTH knob to create various changes until
the pattern plays for one cycle (16 steps × length, or 12 steps ×
length).
6. When the pattern has played for one cycle after you began
moving the knob, the Rec key will automatically go dark and
playback will resume, allowing you to hear the motion sequence
that you just recorded.
You can record the movements of the DELAY TIME knob in the
same way.